help needed on a jetlegend t45 hawk

For items about gas turbine, IC and Electric powered jets, engines and systems

Moderator: Dick Spreadbury

stephen muscat
Posts: 38
Joined: Mon Apr 13, 2009 9:16 am

help needed on a jetlegend t45 hawk

Postby stephen muscat » Sat Sep 23, 2017 5:39 pm

I need some help.
i am putting the retracts in but when i put the door section on.i mean the piece which sits on the leg.
when i push the trailing link down its hitting that section.
have tried changing lots of things
do the wheels point out or in?
either way its hitting that section
any advise would help

jeff sewell
Posts: 7
Joined: Wed Apr 15, 2009 8:26 pm

Re: help needed on a jetlegend t45 hawk

Postby jeff sewell » Fri Nov 10, 2017 7:48 am

Hi Steve,

There should be slight toe-in.

However, the T45 is an old design and the doors particularly were a bit of an afterthought. I don't believe that even the factory offered a door install service on the T45!

My advice would be to ditch them - aesthetically and aerodynamically it won't make that much difference IMO.


simon peckham
Posts: 4
Joined: Thu Apr 01, 2010 7:53 am

Re: help needed on a jetlegend t45 hawk

Postby simon peckham » Mon Feb 19, 2018 8:38 pm

This is how ive seen it done. if you cut a triangular piece off that allows the wheel to clear the cover you can then glue that piece into position on the wing.
DSC002942.jpg (179.9 KiB) Viewed 1120 times

Return to “Jets”

Who is online

Users browsing this forum: No registered users and 3 guests